2018 Epiroc Hydraulic Drill Rigs SpeedROC D30
- Year 2018
- Make Epiroc
- Model Hydraulic Drill Rigs
2018 Epiroc Hydraulic Drill Rigs SpeedROC D30
2018 Epiroc Hydraulic Drill Rigs SpeedROC D30
SpeedROC D30 is a versatile and flexible drill rig, tailor-made for the dimension stone industry. It is capable of drilling straight, vertical and horizontal holes that enable wire cutting. Tramming, rotation and feed is powered by an on-board engine. Together with a well-matched, external compressor unit, they run the down-the-hole hammer. SpeedROC D30's special design makes it capable of drilling horizontal holes with minimum ground clearance from both right and left directions.
Features may include:Surface drill rig for the dimension stone industry
- Tailor-made for the dimension stone industry
- Drills straight holes just 8 cm from the ground to the hole center
- Quick positioning time and low fuel consumption
Engine
Engine Manufacturer
Kubota V1505
Engine Power
26.2 kW (35.1HP) (at 3000 rpm)
Electric
Electrical
Voltage: 12 V | Alternator: 12 V
Battery
Battery
2 x 12 V
Operational
Operating Conditions
Ambient temperature: -20°C – +45°C (24.8°F/113°F) | Feed force, max: 10 kN (2 248 lbf) | Tractive pull, max: 10 kN (2 248 lbf) | Filtering area: 6 m2 (65 sq.ft) | Suction capacity: 800 m3/h (471 cfm)
Operating Speed
Tramming: 9 km/h (5.6 mph)
Hydraulics
Displacement
Pistons vriable displ with LS control pump: 45 cc | Gear pump: 18 cc
Maximum Pressure
8 bar (116 psi)
Hydraulic Flow
28.3 l/s (60 cfm )
Dimensions
Ground Clearance
230 mm (9")
Dimensions
Drill pipe 63–76 mm (2.5"–3") | Feed extension: 1 200 mm (47.2") | Suction hose diameter: 100 mm (3.9")
Length
1.5/2 m (4.92/6.56 ft) | Total: 3 530 mm (139") | Travel: 2 150 mm (84.6")
Capacities
Hydraulic Capacity
50.0 l (13.2 gal) / 70.0 l (18.5 gal)
Oil capacity
Engine: 6.0 l (1.5 gal)
Fuel Capacity
Diesel tank: 58.0 l (15.3 gal)
Lubrication
Tank: 2.4 l (0.6 gal)