2018 Epiroc Hydraulic Drill Rigs SpeedROC D30

Information

2018 Epiroc Hydraulic Drill Rigs SpeedROC D30

SpeedROC D30 is a versatile and flexible drill rig, tailor-made for the dimension stone industry. It is capable of drilling straight, vertical and horizontal holes that enable wire cutting. Tramming, rotation and feed is powered by an on-board engine. Together with a well-matched, external compressor unit, they run the down-the-hole hammer. SpeedROC D30's special design makes it capable of drilling horizontal holes with minimum ground clearance from both right and left directions.

Features may include:

Surface drill rig for the dimension stone industry

  • Tailor-made for the dimension stone industry
  • Drills straight holes just 8 cm from the ground to the hole center
  • Quick positioning time and low fuel consumption

Photos

Highlights

  • Anchorage, Alaska
  • 2018
  • Epiroc
  • Hydraulic Drill Rigs SpeedROC D30
  • Available

Specifications

  • 2018
  • Epiroc
  • Hydraulic Drill Rigs
  • SpeedROC D30
  • Track
  • Kubota V1505
  • 26.2 kW (35.1HP) (at 3000 rpm)
  • Voltage: 12 V | Alternator: 12 V
  • 2 x 12 V
  • Ambient temperature: -20°C – +45°C (24.8°F/113°F) | Feed force, max: 10 kN (2 248 lbf) | Tractive pull, max: 10 kN (2 248 lbf) | Filtering area: 6 m2 (65 sq.ft) | Suction capacity: 800 m3/h (471 cfm)
  • Tramming: 9 km/h (5.6 mph)
  • Pistons vriable displ with LS control pump: 45 cc | Gear pump: 18 cc
  • 8 bar (116 psi)
  • 28.3 l/s (60 cfm )
  • Drill pipe 63–76 mm (2.5"–3") | Feed extension: 1 200 mm (47.2") | Suction hose diameter: 100 mm (3.9")
  • 230 mm (9")
  • 1.5/2 m (4.92/6.56 ft) | Total: 3 530 mm (139") | Travel: 2 150 mm (84.6")
  • 50.0 l (13.2 gal) / 70.0 l (18.5 gal)
  • Engine: 6.0 l (1.5 gal)
  • Diesel tank: 58.0 l (15.3 gal)
  • Tank: 2.4 l (0.6 gal)