2025 Epiroc Face drill rigs Boomer 282

Information

2025 Epiroc Face drill rigs Boomer 282

High productivity drill

The Boomer 282 is a hydraulically controlled mining and tunneling face drilling rig with two booms, adaptable to various heading sizes. This rig is designed for reliable and highly efficient development in medium sized underground cross sections. Robust design allows for fast positioning, a high penetration rate, straight holes, superior durability and lower drill steel cost. All this adds up to increased productivity, lower operation cost and easier maintenance and troubleshooting with the Boomer 282.

Photos

Highlights

  • Anchorage, Alaska
  • 2025
  • Epiroc
  • Face drill rigs Boomer 282
  • Hydrostatic transmission: Clark 12 000
  • Available
  • 1 980 mm
  • roof up/down: 3 010 mm/2 310 mm | over drill centre: 88 mm

Specifications

  • 2025
  • Epiroc
  • Face drill rigs
  • Boomer 282
  • Rotary
  • Power rating at 2 300 rpm: 55.4 kW (75 hp)
  • Torque at 1 300 rpm: 390 Nm
  • Water cooled oil
  • Hydrostatic transmission: Clark 12 000
  • Service brakes: 2 separate circuits
  • SAHR
  • Tyres: Michelin 12.00xR20
  • 2 x 70 Ah
  • Impact rate: 60 Hz |System: 24 V | Transformer: 3.9 kVA | Frequency: 50–60 Hz | Voltage: 380–1 000 V | Total installed power: 125 kW | Main motor: 2x55 kW
  • Rotation torque, max: 640 / 1000 Nm |Feed roll-over: 360° | Feed force: 15.0 kN | Feed extension: 1 250 mm| Boom extension: 1 250 mm| Boom: BUT 28 |
  • Rotation speed: 0-340/0-215 rpm | Tramming speed: >12.5 km/h
  • Sound level: <106 dB(A)
  • jacks, front: 2 extendable | jacks, rear: 2
  • Hydraulic: 200 bar | System pressure, max: 230 bar
  • Tramming lights: LED 8x25W, 24 V DC | Working lights: LED 4x50W, 24 V DC
  • Drill rod length: 3 090 mm | Cable reel: 660/1 395 mm
  • Total: 4 594 mm | BMH 2843 feed: 11 306 mm | without shank: 1 008 mm | Drill rod length: 3 090 mm
  • roof up/down: 3 010 mm/2 310 mm | over drill centre: 88 mm
  • 1 980 mm
  • 315 mm
  • Hole depth: 2 775 mm
  • Min water inlet pressure: 2 bar | Water booster pump max capacity at 13.5 bar: 100 L/min | Electronically driven water booster pump: Lowara 10SV13F055 | Hydraulic pumps: 2 separate units, one for each boom | Hydraulic oil tank, volume max: 195 L | Filtration: 16 µm | Water consumption: 40-120 l/min
  • 60 l
  • Automatic differential, limited slip 45% rear axle | Clearance outside axles: 15°
  • Dana 123
  • Dana 123, ±6° oscillation
  • 175 kg | Total: 13 500 kg | Boom only : 1 750 kg | Engine side : 5000 kg | incl. drill: 475 kg
  • Rotation system: Separate rotation | Hydraulic Direct Control System, DCS | Basic functions such as anti-jamming included | Rotation system: Separate rotation | Boom: But 28
  • Adapter: R38/T38
  • Articulated steering: ±41° steering angle| Max. lifting angle: +65°/–30° | Max. swinging angle: +45°/-25°