2025 Epiroc Face drill rigs Boomer M20 S

Information

2025 Epiroc Face drill rigs Boomer M20 S

Reliable, accurate and predictable drilling

The new booms of the Boomer M20 S jumbo drill rig feature internal hydraulics and a hoseless design. This means less unplanned downtime for hose repairs which will increase productivity and machine utilization, as well as facilitate planning of your mining operations.

Smart and Green series

Epiroc continues the charge towards electrification in underground mining and the Boomer M20 S comes with a battery-electric driveline option, named Boomer M20 SG (Smart and Green). The battery-powered Boomer M20 SG brings additional savings on health, maintenance, ventilation and cooling.

Photos

Highlights

  • Anchorage, Alaska
  • 2025
  • Epiroc
  • Face drill rigs Boomer M20 S
  • Available
  • 2 245 mm
  • with cabin: 3 000 mm | roof up/down: 3 091/2 375 mm

Specifications

  • 2025
  • Epiroc
  • Face drill rigs
  • Boomer M20 S
  • Rotary
  • Deutz TCD 2013 L04
  • 120 kW
  • Stage IIIA/Tier 3
  • Tyres: 12.00xR24 | Tubeless tires (Michelin X MINE D2)
  • Battery 280 Ah | 24 V Batteries 2x125 Ah
  • Starting method, star/delta (400-690 V)/ direct start (1 000 V) | Epiroc Rig Control System (RCS 5) | Advanced Boom Control (ABC) Regular | Transformer 8 kVA | Direct Control System: 2 (DCS 2) | System: 24 V |Frequency: 50-60 Hz | Voltage: 380??–1 000 V 50/60 Hz | Total installed power: 118 kW| Main motor: Sf 1.15 2x75 kW*
  • On flat ground (rolling resistance 0.05)* >15 km/h | Boom: BUT M
  • 128 dB(A) re 1 pW* |Sound level: 128 dB(A) re | Operator sound pressure level working close to machine, drilling, free field : 104±6 dB(A) re 20 uPa
  • Front and rear hydraulic jacks
  • Tramming lights: 8x22 W LED | Working lights: 4x150 W, 24 V DC
  • Drill rod length: 3 090 mm | Cable reel: 1 600 mm
  • BMH 6000-Series 12 ft, 14 ft, 16 ft, 18 ft | with BMH: 6X14 feed(s) 13 985 mm
  • with cabin: 3 000 mm | roof up/down: 3 091/2 375 mm
  • 2 245 mm
  • 260 mm
  • Turning radius outer/inner (equipped with COP MD20/COP 1838/COP 2238): 7 500/4 400 mm
  • Hydraulic water booster pump, max capacity at 13.5 bar boost 200 l/min. Minimum water inlet, 2 bar at 200 l/min | Minimum water inlet, 2 bar at 200 l/min| Filtration: 16 µm| Min water inlet pressure at 200 l/min at preferred pressure of 2 bar | Water booster pump: capacity at 15 bar: 250 l/min
  • 110 l
  • Automatic differential lock on front axle | Clearance outside axles: 13° rear, 22° front
  • Dana 113 (short) axle
  • Dana 113 (short) axle
  • 175 kg | Total: 16 500 kg | Boom side: 9 000 kg | Engine side: 7 500 kg
  • Front window 22 mm (P8B saftey classed) | Fixed seat | Reversing camera with monitor | Air conditioning unit |Four-wheel drive | Carrier Control System | Dual controls for cable reel | Battery charger | Phase sequence and eart fault indicator | Percussion hour meter on operator display| Digital voltmeter/amperage meter in electric cabinet | Electronic overload protection for electric motors | Rig access control | Bolt view | Underground Manager PRO (PC software) | Electrical oil filling pump | Mineral hydraulic oil | Oil filter indicator | Filtration 10 µm | Oil temperature gauge on oil tank, electronically supervised | Oil level sensor | Rock drill lubrication warning kit | Hole blowing kit
  • Adapter: Diameter 38 mm
  • Articulated steering ±41° steering angle*