2025 Epiroc Face drill rigs Boomer XL3 D

Information

2025 Epiroc Face drill rigs Boomer XL3 D

Extra large drill

The Boomer XL3 D is a robust three-boom face drill rig providing an extra-large coverage of 178 m2 with the boom BUT 35L. The upward moving X-style boom bracket can reach higher. The FAMIII option allows quick positioning and more precise holes. Operators are assured a good line of sight with the adjustable operation platform. Designed to reduce labor costs while increasing productivity, the hard working Boomer XL3 D is an excellent investment for large scale underground operations.

Photos

Highlights

  • Anchorage, Alaska
  • 2025
  • Epiroc
  • Face drill rigs Boomer XL3 D
  • Hydrostatic transmission: Clark 32 000
  • Available
  • 2 926
  • roof up/down: 3 789/3 089 | over drill centre: 88 mm

Specifications

  • 2025
  • Epiroc
  • Face drill rigs
  • Boomer XL3 D
  • Rotary
  • Deutz TCD 2013
  • Power rating at 2 300 rpm: 173 kW (235 hp)
  • Torque at 1 500 rpm: 907 N
  • L06 2V Stage IIIA / Tier 3
  • Impact rate: 60 Hz
  • Electric motor: 15 kW | Total installed power: 63 kW | Main motor: 1 x 55 kW | Voltage: 380 - 1 000 V | Frequency: 50–60 Hz
  • Hydrostatic transmission: Clark 32 000
  • SAHR
  • 2 separate circuits
  • Tyres: 14.00xR24 Michelin XKA
  • Transformer: 12 kVA | 2x120 Ah
  • Impact power: 16 kW |System: 24 V |Frequency: 50 Hz - 60Hz | Voltage: 400–690| Total installed power: 200 kW | Main motor: 3x55 kW
  • Rotation torque, max: 640 / 1 000 Nm | Starting method : star/delta | Feed roll-over: 360° | Feed force: 22 kN | Feed extension: 1 800 mm/1 600 mm | Boom extension: BUT 35
  • Rotation speed 0-340/0-215 rpm |Tramming speed: >17
  • Sound level: 130 dB(A) re 1pW
  • jacks, front: 2 extendable with large plates| jacks, rear: 2
  • Hydraulic: 200 bar | System pressure, max: 210 b
  • Tramming lights: 8x40W | Working lights:8x80W Illuminated stairs for platform, LED: 2x40W
  • Drill rod length: 4 310 mm| Hole over drill center 88 mm | Cable reel (inner/outer diameter): 1 020/1 800 mm
  • Total: 5 882 mm | with BMH 6818 feeds 16 565 | without shank: 1 008 mm
  • roof up/down: 3 789/3 089 | over drill centre: 88 mm
  • 2 926
  • 396 mm
  • Hole depth: 4 048 mm
  • 12 100/6 700 mm
  • Min water inlet pressure at 300 L/min: 2 bar | Hydraulic pumps: 3 separate units, one for each boom| Hydraulic oil tank, volume max: 470/755 L | Filtration: 10 µm | Water booster pump max capacity at 7 bar: 300 L/min
  • 150 L
  • Automatic differential, limited slip 45% rear axle | Clearance outside axles: 15º
  • Dana 37R116
  • Dana 213/169 with ± 7° oscillation
  • incl. drill 670 kg | Total: 42 000 | Boom side: 32 000 | Engine side : 10 000 | Weight, Boom only: 2 920 kg
  • Beacon and reverse alarm | Silencer| Manual differential lock on front axle | Hydrostatic power steering system | Four-wheel drive| Rotation system: Separate rotation | Electric driven water booster pump Lowara 22SV12F150 | Air pressure gauge | Dual controls for cable reel |Limit switch for cable reel Battery charger | Earth fault indicator | Phase sequence indicator | Digital voltmeter/amperage/percussion hour meter in electric cabinet | Thermal overload protection for electric motor| Mineral hydraulic oil | Electrical oil filling pump | Oil temperature gauge on oil ta |Low oil level indicator | Pumps unloaded at start |Basic functions such as anti-jamming included | Direct hydraulic Control System, DCS 2
  • Adapter: R38/T38
  • Articulated steering: ±41° steering angle| Max. lifting angle: +70°/–30°| Boom swing angle L/R: ±45°