2025 Epiroc Raiseboring equipment Robbins 53RH

Information

2025 Epiroc Raiseboring equipment Robbins 53RH

Low profile raise drill for holes ranging from 1.2 to 2.4 m in diameter.

This unique multipurpose raise drill is able to perform upwards boxhole boring as well as conventional raiseboring with no need to modify the drive assembly.

Features may include:

Low profile boring machine
  • The Robbins 53RH is a low profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter. This unique multipurpose raise drill is able to perform upwards boxhole boring as well as conventional raiseboring with no need to modify the drive assembly. The main gearbox features two float boxes to easily switch from raise to boxhole mode. Two double-acting telescopic cylinders can exert equal thrust in both directions. The 53RH is cleverly compact yet powerful, granting it greater flexibility to tackle a variety of tough applications where workspace is restricted.

Photos

Highlights

  • Anchorage, Alaska
  • 2025
  • Epiroc
  • Raiseboring equipment Robbins 53RH
  • Available
  • 86" (2 200 mm) | with pipeloader included: 124" (3 140 mm) | Power pack: 67" (1 700 mm)
  • extended: 113" (2 900 mm) | retracted: 113" (2 900 mm) | Power pack: 67" (1 700 mm)

Specifications

  • 2025
  • Epiroc
  • Raiseboring equipment
  • Robbins 53RH
  • General
  • Power supply: 260/298 kW (50/60 Hz) 300/400 hp | Voltage: 400-1 000 V | Frequency: 50/60 Hz | Power requirement: 317/363 kVA (50/60 Hz)
  • Reaming: 115 000 ft-lbs (156 kNm) | Break out: 141 000 ft-lbs (190 kNm) | Reaming thrust: 753 100 lbs (3 350 kN) | Fast traverse rate: 5.9 ft/min (1.8 m/min) | Feed rate: 2 ft/min (0.6 m/min) | Bailing Air: 635 ft3/min (100 psi) (18 m3/min (7 bar))
  • Pilot: 0-35 rpm | Reaming (Reduced torque): 0-9 rpm (9-15 rpm)
  • Bailing Water: 159 gallon/min (600 l/min) | Cooling water At 25°C inlet temperature: 21 gal/min (80 l/min )
  • diameter Nominal: 6 ft (1.8 m) | diameter Range: 4-8 ft (1.2-2.4 m) | Drill pipe diameter: 11 ¼" (286 mm) | Pilot hole Diameter: 12 ¼" (311 mm) | Drill angle (from horizontal): 90-45°
  • Raise Nominal: 1 600 ft (490 m) | Raise Maximum: 2 100 ft (650 m) | Drill pipe s/s: 30" (750 mm) | Power pack: 126" (3 200 mm)
  • 45" (1 143 mm)
  • extended: 113" (2 900 mm) | retracted: 113" (2 900 mm) | Power pack: 67" (1 700 mm)
  • 86" (2 200 mm) | with pipeloader included: 124" (3 140 mm) | Power pack: 67" (1 700 mm)
  • 72" (1 820 mm)
  • 33 070 lb (15 000 kg) | pipeloader included: 34 656 lbs (15 720 kg) | power pack: 12 126 lbs (5500 kg)