2024 Tigercat Drive-to-Tree Feller Bunchers 724G

Information

2024 Tigercat Drive-to-Tree Feller Bunchers 724G

With more horsepower and a wider footprint, the 724G feller buncher benefits from added stability, increased responsiveness and consistent performance. Well suited to a wide range of demanding, high production logging operations.

Features may include:

  • Tigercat’s wideRANGE® drive. Quicker working travel speeds and powerful tractive effort
  • Optimized hydraulic system for quick saw recovery
  • Durable Tigercat axles accommodate a variety of available tire options
  • High capacity cross-flow cooling. Automatic variable speed for improved fuel efficiency, automatic reversing cycle
  • Compartmentalized layout separates the cooling system, engine, and hydraulic components
  • Long-life centre section constructed with thick steel plate, large diameter pins and tapered roller bearings

Photos

Highlights

  • Anchorage, Alaska
  • 2024
  • Tigercat
  • Drive-to-Tree Feller Bunchers 724G
  • Tigercat wideRANGE® drive Variable speed hydrostatic (2) Piston motors, infinitely variable
  • Available
  • 123 in
  • 138 in

Specifications

  • 2024
  • Tigercat
  • Drive-to-Tree Feller Bunchers
  • 724G
  • General
  • Tigercat FPT N67 Tier 4f
  • Rated: 184 kW (247 hp) @ 2,200 rpm | Peak: 189 kW (254 hp) @ 2,000 rpm
  • Precleaner and 2-stage engine air cleaner
  • Cross-flow Side-by-side aluminum radiator, oil cooler, charge air cooler and A/C condenser
  • Tigercat wideRANGE® drive Variable speed hydrostatic (2) Piston motors, infinitely variable
  • Dynamic braking: Hydrostatic | Secondary brakes: Enclosed, oil cooled
  • Driveline mounted wet disc Spring applied, hydraulic release
  • 30.5Lx32,26 (wide offset)
  • (2) 12 v
  • 80 amp, 24 v
  • System voltage: 24 V
  • Widerange: 10 mph | 2-speed low: 5.5 mph | 2-speed high: 15.5 mph
  • Drive: Piston | Boom: Gear | Steering: Gear | Saw: Piston | Fan: Gear
  • Frame articulation: +/- 45° | Cylinders, steer: (2) 75 mm (3 in) bore | Cylinders, boom: (4) 115 mm (4.5 in) bore lift and tilt
  • Less attachment: 228 in
  • 115 in
  • 123 in
  • 138 in
  • 25 in
  • 80 US gal
  • Fan: Hydraulically driven Automatic variable speed with automatic reversing cycle | Axles: Tigercat IB15, inboard planetary, barrel differential Front fixed Rear oscillating +/-15° | Differential locks: Independent front and rear | Filtration: (4) Spin-on, 7 micron full flow | Operator controls: Hydraulic pilot, joystick for boom and steering (2) foot pedals for forward/reverse travel
  • Less attachment: 29,230 lb