2024 Tigercat Loaders 250D

Information

2024 Tigercat Loaders 250D

The 250D is suited to delimbing, merchandising and loading heavy, tree-length logs. The 250D can be equipped with a pull-through delimber, bar saw slasher, circle saw slasher or grapple saw for maximum flexibility.

Features may include:

  • Efficient load sensing hydraulic system. High performance, low fuel consumption
  • Dedicated swing pump. Quick swing cycles, enhanced pull-through delimbing performance
  • Energy recovery swing system. Closed loop system recovers energy as swing decelerates
  • Automatic engine idle down. Reduced fuel consumption in variable wood flow situations
  • Strength-to-weight optimized boom. Designed for heavy lifting and pull-through delimbing
  • Quiet, climate controlled operating environment

Photos

Highlights

  • Anchorage, Alaska
  • 2024
  • Tigercat
  • Loaders 250D
  • Available
  • 102 in
  • 139 in

Specifications

  • 2024
  • Tigercat
  • Loaders
  • 250D
  • General
  • Tigercat FPT N67 Tier 4f / Tigercat FPT N67 Tier 2
  • Rated: 151 kW (203 hp) @ 2,200 rpm | Peak: 165 kW (221 hp) @ 1,900 rpm
  • Side-by-side aluminum radiator, oil cooler, charge air cooler and A/C condenser
  • (2) 950 CCA, 12 v
  • 80 amp, 24 v
  • System voltage: 24 v
  • Swing Drive: 9 rpm variable, 360° continuous rotation
  • Main: Gear, triple section | Swing: Piston, pressure compensated
  • End: Fabricated from steel plate
  • Halogen, (2) boom mounted, (3) cab mounted, (1) engine house / (1) service, engine house
  • Cylinder, hoist: 178 mm (7 in) diameter | Cylinder, stick: 152 mm (6 in) diameter | Cylinders, stabilizers: (4) 165 mm (6.5 in) diameter Bolt-on bi-directional lock valves | Support base: 150 in x 183 in | Stabilizer pads: 23 in x 28 in | Swing Bearing: 1 190 mm (47 in) ball circle diameter | Maximum reach: 32 ft
  • Less boom and steps: 200 in | Subframe less step: 169 in
  • 102 in
  • 139 in
  • 100 US gal
  • Fan: Fixed pitch, high flow | Filtration: (4) Spin-on, 7 micron full-flow | Enclosure: Walk-up platform | Boom: Hydraulic joystick | Swing: Foot operated pilot valve | Stabilizers: Electric switches
  • Bare Pin Lift at 25 ft: 15,600 lb
  • Less attachment: 37,500 lb