2025 Tigercat Loaders 250E

Information

2025 Tigercat Loaders 250E

Suited to heavy timber and tough duty cycle delimbing and merchandising.

The 250E is suited to delimbing, merchandising and loading heavy, tree-length logs. The 250E can be equipped with a pull-through delimber, bar saw slasher, circle saw slasher or grapple saw for maximum flexibility.

Efficient hydraulics with swing priority and energy recovery deliver simultaneous power to all machine functions for high performance, response and fuel economy.

Features may include:

  • Efficient load sensing hydraulic system. High performance, low fuel consumption
  • Dedicated swing pump. Quick swing cycles, enhanced pull-through delimbing performance
  • Energy recovery swing system. Closed loop system recovers energy as swing decelerates
  • Automatic engine idle down. Reduced fuel consumption in variable wood flow situations
  • Strength-to-weight optimized boom. Designed for heavy lifting and pull-through delimbing
  • Quiet, climate controlled operating environment

Photos

Highlights

  • Anchorage, Alaska
  • 2025
  • Tigercat
  • Loaders 250E
  • Model: FPT N67
  • Available
  • 102 in
  • 139 in

Specifications

  • 2025
  • Tigercat
  • Loaders
  • 250E
  • General
  • Model: FPT N67
  • Tigercat
  • Tier 4f / Tier 2/ Non-certified
  • Rated Tier 4f: 151 kW (203 hp) @ 2,200 rpm | Peak Tier 4f: 165 kW (221 hp) @ 1,900 rpm | Rated Tier 2: 159 kW (213 hp) @ 2,100 rpm | Peak Tier 2: 165 kW (221 hp) @ 1,900 rpm | Rated Non-certified: 151 kW (203 hp) @ 2,200 rpm
  • Side-by-side aluminum radiator, oil cooler, charge air cooler and A/C condenser
  • (2) 950 CCA, 12 v
  • 80 amp, 24 v
  • System voltage: 24 v
  • Swing Drive: 9 rpm variable, 360° continuous rotation
  • Main: Gear, triple section | Swing: Piston, pressure compensated
  • End: Fabricated from steel plate
  • Halogen, (2) boom mounted, (3) cab mounted, (1) engine house / (1) service, engine house
  • Cylinder, hoist: 178 mm (7 in) diameter | Cylinder, stick: 152 mm (6 in) diameter | Cylinders, stabilizers: (4) 165 mm (6.5 in) diameter Bolt-on bi-directional lock valves | Support base: 150 in x 183 in | Stabilizer pads: 23 in x 28 in | Swing Bearing: 1 190 mm (47 in) ball circle diameter | Maximum reach: 32 ft
  • Less boom and steps: 200 in | Subframe less step: 169 in
  • 102 in
  • 139 in
  • 100 US gal
  • Fan: Fixed pitch, high flow | Filtration: (4) Spin-on, 7 micron full-flow | Enclosure: Walk-up platform | Boom: Hydraulic joystick | Swing: Foot operated pilot valve | Stabilizers: Electric switches
  • Bare Pin Lift at 25 ft: 15,600 lb
  • Less attachment: 37,500 lb