2025 Tigercat Loaders 250E
- Year 2025
- Make Tigercat
- Model Loaders
- Engine Model: FPT N67
2025 Tigercat Loaders 250E
2025 Tigercat Loaders 250E
Suited to heavy timber and tough duty cycle delimbing and merchandising.The 250E is suited to delimbing, merchandising and loading heavy, tree-length logs. The 250E can be equipped with a pull-through delimber, bar saw slasher, circle saw slasher or grapple saw for maximum flexibility.
Efficient hydraulics with swing priority and energy recovery deliver simultaneous power to all machine functions for high performance, response and fuel economy.
Features may include:
- Efficient load sensing hydraulic system. High performance, low fuel consumption
- Dedicated swing pump. Quick swing cycles, enhanced pull-through delimbing performance
- Energy recovery swing system. Closed loop system recovers energy as swing decelerates
- Automatic engine idle down. Reduced fuel consumption in variable wood flow situations
- Strength-to-weight optimized boom. Designed for heavy lifting and pull-through delimbing
- Quiet, climate controlled operating environment
Engine
Engine Manufacturer
Tigercat
Engine
Model: FPT N67
Emissions
Tier 4f / Tier 2/ Non-certified
Engine Power
Rated Tier 4f: 151 kW (203 hp) @ 2,200 rpm | Peak Tier 4f: 165 kW (221 hp) @ 1,900 rpm | Rated Tier 2: 159 kW (213 hp) @ 2,100 rpm | Peak Tier 2: 165 kW (221 hp) @ 1,900 rpm | Rated Non-certified: 151 kW (203 hp) @ 2,200 rpm
Cooling
Side-by-side aluminum radiator, oil cooler, charge air cooler and A/C condenser
Battery
Battery
(2) 950 CCA, 12 v
Electric
Alternator
80 amp, 24 v
Electrical
System voltage: 24 v
Operational
Operating Speed
Swing Drive: 9 rpm variable, 360° continuous rotation
Hydraulics
Pump Type
Main: Gear, triple section | Swing: Piston, pressure compensated
Chassis
Frame Type
End: Fabricated from steel plate
Lights and Safety
Lighting
Halogen, (2) boom mounted, (3) cab mounted, (1) engine house / (1) service, engine house
Dimensions
Length
Less boom and steps: 200 in | Subframe less step: 169 in
Width
102 in
Height
139 in
Dimensions
Cylinder, hoist: 178 mm (7 in) diameter | Cylinder, stick: 152 mm (6 in) diameter | Cylinders, stabilizers: (4) 165 mm (6.5 in) diameter Bolt-on bi-directional lock valves | Support base: 150 in x 183 in | Stabilizer pads: 23 in x 28 in | Swing Bearing: 1 190 mm (47 in) ball circle diameter | Maximum reach: 32 ft
Capacities
Fuel Capacity
100 US gal
Features
DEF Capacity: 7 US gal | Reservoir: 37 US gal
Hitch Lift Capacity
Bare Pin Lift at 25 ft: 15,600 lb
Weights
Weight
Less attachment: 37,500 lb
Features
Features
Fan: Fixed pitch, high flow | Filtration: (4) Spin-on, 7 micron full-flow | Enclosure: Walk-up platform | Boom: Hydraulic joystick | Swing: Foot operated pilot valve | Stabilizers: Electric switches