2024 Tigercat Loggers 865
- Year 2024
- Make Tigercat
- Model Loggers
2024 Tigercat Loggers 865
2024 Tigercat Loggers 865
The 865 is purpose-built to eliminate the design compromises found in excavator conversions. The upper frame assembly and undercarriage are designed for forest duty and ease of service.
Features may include:
- High horsepower engine. Increases productivity and multi-function speed relative to excavator conversions without compromising fuel efficiency
- Safe access rear entry cab. High operator vantage point, full length windows and thoughtful ergonomics
- Twin swing drive motors. Powerful swing torque, reduced pinion loads, extended swing system life
- Clear access to pumps, valves and engine. Far superior to excavator conversions
- Heavy duty Tigercat-built F8 forestry undercarriage
- Protective cast counterweight with engine compartment access door
Engine
Emissions
Tigercat FPT N67 Tier 4f
Engine Power
159 kW (213 hp) @ 2,100 rpm
Air Filter
Precleaner, 2-stage engine air cleaner
Cooling
Side-by-side aluminum radiator, oil cooler, charge air cooler and A/C condenser
Drivetrain
Gearbox
Triple reduction planetary with brake
Brakes
Brake System Type
Track: Friction disc type / Automatic spring applied, hydraulic release | Swing: Friction disc type / Manual spring applied, hydraulic release
Battery
Battery
(2) 12 v
Electric
Alternator
80 amp, 24 v
Electrical
System voltage: 24 v
Operational
Top Speed
Low range: 1.6 mph | High range: 2.8 mph
Operating Conditions
Tractive effort: 58,000 lbf | Short Wood Hydraulic bare pin lift at 30 ft: 15,160 lb | Butt-N-Top/Power Clam Hydraulic bare pin lift at 30 ft: 14,510 lb | Live Heel Hydraulic bare pin lift at 30 ft: 14,120 lb | Processor Hydraulic bare pin lift at 30 ft: 11,000 lb
Operating Speed
Swing drive: 8 rpm variable speed / 360° continuous rotation
Hydraulics
Pump Type
Main 1: Piston, load sensing | Main 2: Piston, load sensing | Cooling fan: Gear
Dimensions
Width
With steps: 135 in
Transport Height
145 in
Ground Clearance
27 in
Turning Radius
Tail swing: 124 in | Short Wood Max: 414 in | Butt-N-Top/Power Clam Max: 390 in | Live Heel Max: 438 in | Processor Max: 402 in
Dimensions
Cylinder, hoist: (2) 135 mm (5.3 in) bore | Cylinder, stick: 150 mm (5.9 in) bore | Cylinder, Tilt: 110 mm (4.3 in) bore | Cylinder, Live Heel: (2) 120 mm (4.7 in) bore | Track chain: F8/D6D 203 mm (8 in) pitch | Track shoe: 610 mm (24 in) single grouser/double grouser | Swing bearing: 1 190 mm (47 in) ball circle diameter
Capacities
Fuel Capacity
158 US gal
Features
DEF Capacity: 12 US gal | Reservoir: 60 US gal
Weights
Weight
Less attachment: 71,400 lb
Features
Features
Fan: Engine driven | Filtration: (5) Spin-on, 7 micron full flow / (1) water absorbing | Horsepower control: Electronic speed sensing