2024 Tigercat Loggers 880E

Information

2024 Tigercat Loggers 880E

The 880E logger is purpose-built to eliminate the compromises found in excavators converted for forestry use.

Features may include:

  • High horsepower engine. Increases productivity and multi-function speed relative to excavator conversions without compromising fuel efficiency
  • Safe access rear entry cab. High operator vantage point, full length windows and thoughtful ergonomics
  • Large diameter swing bearing with twin swing drives for high torque and long life
  • Energy recovery swing system. Closed loop system recovers energy as swing decelerates
  • Dedicated attachment pump. Improves performance, control and efficiency
  • Power operated side door and retracting enclosure. Large work platform, easy access to components and daily service points

Photos

Highlights

  • Anchorage, Alaska
  • 2024
  • Tigercat
  • Loggers 880E
  • Available
  • With steps: 143 in

Specifications

  • 2024
  • Tigercat
  • Loggers
  • 880E
  • Mini
  • Tigercat FPT N67 Tier 4f
  • 212 kW (285 hp) @ 2,200 rpm | Peak: 230 kW (308 hp) @ 2,000 rpm
  • Precleaner, 2-stage engine air cleaner
  • Side-by-side aluminum radiator, oil cooler, charge air cooler and A/C condenser
  • Triple reduction planetary with brake
  • Track: Friction disc type / Automatic spring applied, hydraulic release | Swing: Friction disc type / Manual spring applied, hydraulic release
  • (2) 12 v
  • 110 amp 24 v
  • System voltage: 24 v
  • Low range: 1.4 mph | High range: 2.8 mph
  • Tractive effort: 75,000 lbf | Butt-N-Top/Power Clam Hydraulic bare pin lift at 30 ft: 21,790 lb | Live Heel Hydraulic bare pin lift at 30 ft: 19,130 lb | Processor Hydraulic bare pin lift at 30 ft: 21,680 lb
  • Swing drive: 6,4 rpm variable speed / 360° continuous rotation
  • Main 1: Piston, load sensing | Swing: Piston, closed loop, energy recovery | Attachment: Piston, load sensing | Cooling fan: Gear
  • (12) High output LED / (5) LED service, engine enclosure
  • Cylinder, hoist: (2) 150 mm (5.9 in) bore | Cylinder, stick: 170 mm (6.7 in) bore | Cylinder, Tilt: 110 mm (4.3 in) bore | Cylinder, Live Heel: 130 mm (5.2 in) bore | Track chain: FH400 215 mm (8.5 in) pitch | Track shoe: 710 mm (28 in) double grouser, tall lug | Swing bearing: 1 190 mm (47 in) ball circle diameter
  • With steps: 143 in
  • 135 in
  • 28 in
  • Tail swing: 138 in | Butt-N-Top/Power Clam Max: 447 in | Live Heel Max: 514 in | Processor Max: 459 in
  • 264 US gal
  • Fan: Hydraulically driven / Automatic variable speed and reversing cycle | Filtration: (5) Spin-on, 7 micron full flow / (1) water absorbing | Horsepower control: Electronic speed sensing
  • Less attachment: 94,000 lb | Counterweight: 13,000 lb