2024 Tigercat Track Feller Bunchers L845E

Information

2024 Tigercat Track Feller Bunchers L845E

Best suited to high cycle felling applications and mixed diameter stands, the L845E is a quick, responsive and efficient feller buncher. The carrier is well matched to the Tigercat 5400 felling saw, providing excellent accumulating ability in smaller stem sizes and solid control of larger timber.

Features may include:

  • Clear sightlines, intuitive and ergonomic control system, and quiet, comfortable operating environment
  • Tight tuck ER® boom system with quick cycle times for high productivity in small diameter timber
  • ER® on/off switch to increase increase stick boom force when required
  • Dedicated pumps for both saw and clamp arms for lightning fast cycles and saw recovery
  • Extreme duty leveling undercarriage for excellent stability on steep slopes
  • Clamshell-style roof enclosure with swing-out doors. Excellent access to major components and daily service points

Photos

Highlights

  • Anchorage, Alaska
  • 2024
  • Tigercat
  • Track Feller Bunchers L845E
  • Available
  • 135 in
  • 147 in

Specifications

  • 2024
  • Tigercat
  • Track Feller Bunchers
  • L845E
  • General
  • Tigercat FPT N67 Tier 4f / Tigercat FPT N67 Tier 2
  • Rated: 212 kW (284 hp) @ 2,200 rpm | Tier 2 Rated: 205 kW (275 hp) @ 2,100 rpm
  • Precleaner and 2-stage engine air cleaner
  • Aluminum side by side radiator, oil cooler, charge air cooler / Removable intake debris screen
  • Final: (2) Axial piston motors with brakes valves / Infinitely variable speed; Infinitely variable speed
  • Triple reduction planetary type with brake
  • Track: Friction disc / Automatic spring applied, hydraulic release | Swing: Friction disc / Manual spring applied, hydraulic release
  • (2) 12 v
  • 110 amp, 24 v
  • System voltage: 24 V
  • Low range: 1.1 mph | High range: 2.6 mph
  • Tractive effort: 82,600 lbf
  • Main: Piston | Saw: Piston (For disc saw felling attachments only) | Cooling fan: Piston | Clamp/accum. Arms: Piston
  • Track: R7-163L super-duty forestry / Integral track guides, ramp angles
  • (14) LED / (4) LED service lights, engine enclosure
  • Cylinders, hoist: 140 mm (5.5 in) bore | Cylinders, stick/er: (2) 110 mm (4.3 in) bore | Cylinder, tilt: 130 mm (5.2 in) bore | Cylinder, Leveling: (2) 180 mm (7 in) bore | Track Chain: FH400 215 mm (8.5 in) pitch | Track shoe: 610 mm (24 in) single grouser | Leveling: 20° forward; 6° rear; +/-17° side | Swing bearing: 1 190 mm (47 in) ball circle diameter
  • Less boom: 193 in
  • 135 in
  • 147 in
  • 27 in
  • Tail swing: 105 in | Maximum cut: 336 in | Minimum cut: 142 in
  • 210 US gal
  • Fan: Hydraulically driven / Automatic variable speed and reversing cycle | Filtration: (5) Spin-on, 7 micron full flow / (1) Water absorbing | Horsepower control: Electronic speed sensing / All-speed antistall | Front idler: Hydraulic track adjuster / Spring shock absorber | Rollers, lower: (9) D6 single and double flange tractor type
  • Less attachment: 77,000 lb | Bare pin lift full reach: 12,700 lb