2024 Tigercat Track Feller Bunchers LX870D

Information

2024 Tigercat Track Feller Bunchers LX870D

The high performance LX870D feller buncher is equipped with ER technology and closed loop track drives for speed and response. The machine is well matched to highly skilled operators who demand machine performance on extreme, steep slope felling applications.

Features may include:

  • Closed loop drive system provides optimal balance of speed and tractive effort for high performance and efficiency in extreme terrain
  • Extreme duty leveling undercarriage for excellent stability on steep slopes
  • ER boom technology® improves fuel efficiency, reduces operator fatigue and increases productivity
  • ER® on/off switch to increase increase stick boom force when required
  • Power operated side door and retracting enclosure. Large work platform, easy access to components and daily service points
  • High capacity cooling. Automatic variable speed for improved fuel efficiency, automatic reversing cycle

Photos

Highlights

  • Anchorage, Alaska
  • 2024
  • Tigercat
  • Track Feller Bunchers LX870D
  • Available
  • with steps: 135 in
  • 147 in

Specifications

  • 2024
  • Tigercat
  • Track Feller Bunchers
  • LX870D
  • General
  • Tigercat FPT C87 Tier 4f,
  • Rated: 245 kW (330 hp) @ 1,950 rpm
  • Precleaner and 2-stage engine air cleaner
  • Aluminum side-by-side radiator, oil cooler, charge air cooler, A/C condensor / Removable intake debris screen
  • Final: (2) Axial piston motors, Infinitely variable speed
  • Triple reduction planetary type with brake
  • Track: Friction disc / Automatic spring applied, hydraulic release | Swing: Friction disc / Manual spring applied, hydraulic release
  • (2) 12 LA
  • 110 amp, 24 v
  • System voltage: 24 V
  • Low range: 1.1 mph | High range: 2.6 mph
  • Tractive effort: 77,100 lbf
  • Main: Piston | Saw: Piston | Fan: Piston | Track: (2) Piston, closed loop | Clamp/accum.: Piston | Charge/Pilot: Gear | Case: Gear
  • Track: R7-163L Super-duty forestry, integral track guides, ramp angles
  • (15) LED / (4) LED service lights, engine enclosure
  • Cylinders, hoist: (2) 120 mm (4.7 in) bore | Cylinders, stick/er: (2) 110 mm (4.3 in) bore | Cylinder, tilt: 130 mm (5.1 in) bore | Cylinder, Leveling: (2) 180 mm (7 in) bore | Track Chain: FH400 215 mm (8.5 in) pitch | Track shoe: 610 mm (24 in) single grouser | Leveling: 20° forward, 7° rear; +/-15° side | Swing bearing: 1 190 mm (47 in) ball circle diameter
  • Less boom: 210 in
  • with steps: 135 in
  • 147 in
  • 27 in
  • Tail swing: 129 in | Maximum cut: 333 in | Minimum cut: 189 in
  • 287 US gal
  • Fan: Hydraulically driven / Automatic variable speed and reversing cycle | Filtration: (5) Spin-on, 7 micron full flow / (1) water absorbing | Filtration Case: (1) Spin-on, 6 micron full flow | Filtration Charge/Pilot: (2) Spin-on, 6 micron full flow | Horsepower control: Electronic speed sensing / All-speed antistall | Front idler: Hydraulic track adjuster; Spring shock absorber | Rollers, lower: (10) FH400 single/double flange excavator
  • Less attachment: 80,870 lb | Bare pin lift full reach: 18,600 in