2024 Tigercat Loggers 865

Information

2024 Tigercat Loggers 865

The 865 is purpose-built to eliminate the design compromises found in excavator conversions. The upper frame assembly and undercarriage are designed for forest duty and ease of service.

Features may include:

  • High horsepower engine. Increases productivity and multi-function speed relative to excavator conversions without compromising fuel efficiency
  • Safe access rear entry cab. High operator vantage point, full length windows and thoughtful ergonomics
  • Twin swing drive motors. Powerful swing torque, reduced pinion loads, extended swing system life
  • Clear access to pumps, valves and engine. Far superior to excavator conversions
  • Heavy duty Tigercat-built F8 forestry undercarriage
  • Protective cast counterweight with engine compartment access door

Photos

Highlights

  • Anchorage, Alaska
  • 2024
  • Tigercat
  • Loggers 865
  • Available
  • With steps: 135 in

Specifications

  • 2024
  • Tigercat
  • Loggers
  • 865
  • Mini
  • Tigercat FPT N67 Tier 4f
  • 159 kW (213 hp) @ 2,100 rpm
  • Precleaner, 2-stage engine air cleaner
  • Side-by-side aluminum radiator, oil cooler, charge air cooler and A/C condenser
  • Triple reduction planetary with brake
  • Track: Friction disc type / Automatic spring applied, hydraulic release | Swing: Friction disc type / Manual spring applied, hydraulic release
  • (2) 12 v
  • 80 amp, 24 v
  • System voltage: 24 v
  • Low range: 1.6 mph | High range: 2.8 mph
  • Tractive effort: 58,000 lbf | Short Wood Hydraulic bare pin lift at 30 ft: 15,160 lb | Butt-N-Top/Power Clam Hydraulic bare pin lift at 30 ft: 14,510 lb | Live Heel Hydraulic bare pin lift at 30 ft: 14,120 lb | Processor Hydraulic bare pin lift at 30 ft: 11,000 lb
  • Swing drive: 8 rpm variable speed / 360° continuous rotation
  • Main 1: Piston, load sensing | Main 2: Piston, load sensing | Cooling fan: Gear
  • Cylinder, hoist: (2) 135 mm (5.3 in) bore | Cylinder, stick: 150 mm (5.9 in) bore | Cylinder, Tilt: 110 mm (4.3 in) bore | Cylinder, Live Heel: (2) 120 mm (4.7 in) bore | Track chain: F8/D6D 203 mm (8 in) pitch | Track shoe: 610 mm (24 in) single grouser/double grouser | Swing bearing: 1 190 mm (47 in) ball circle diameter
  • With steps: 135 in
  • 145 in
  • 27 in
  • Tail swing: 124 in | Short Wood Max: 414 in | Butt-N-Top/Power Clam Max: 390 in | Live Heel Max: 438 in | Processor Max: 402 in
  • 158 US gal
  • Fan: Engine driven | Filtration: (5) Spin-on, 7 micron full flow / (1) water absorbing | Horsepower control: Electronic speed sensing
  • Less attachment: 71,400 lb